AEMC | Megohmmeters | Clamp On Meters | Transformer Testers

Home

Feedback

Business to Business

AEMC Instruments

| Products | Manufacturers | Services l

l Products:

Power Quality Meters / Analyzers
Oscilloscopes
Motor / Transformer Testers
Micro-Ohmmeters
Megohommeters
Leakage Current Testers
Highpot Testers
Ground Resistance Meters
Environmental Testers
Electrical Test Tools
DC Power Supplies
Data Loggers
Current Probes
Clamp-On Meters
Calibration Instruments
Cable Testers
Accessories

Catalogs

Please contact techniCAL for addition information.

POWER QUALITY METERS

Three-Phase Power Quality Analyzers
Complete line of three-phase power quality analyzers

Single-Phase Power Quality Analyzers
Complete line of single-phase power quality analyzers

Power Loggers
Complete line of power quality loggers

Power Meters
Complete line of hand-held power quality meters

Non-Contact Voltage Detectors

OSCILLOSCOPES

Model OX 7102-C [Catalog No. 2124.50]
Portable Oscilloscope Model OX7102-C (2x100 MHz, Color)

Model OX 7102-C Kit [Catalog No. 2124.53]
Portable Oscilloscope Model OX7102-C Kit (2x100 MHz, Color - Kit)

Model OX 7104-C Kit [Catalog No. 2124.54]
Portable Oscilloscope Model OX7104-C Kit (4x100 MHz, Color)

Model OX 7104-C Power Kit [Catalog No. 2124.63]
Portable Oscilloscope Model OX7104-C Power Kit (4x100 MHz, Color - Power Kit)

MOTOR / TRANSFORMER TESTERS

Model DTR-8500 [Catalog No. 2111.80]
Digital Transformer Ratiometer Model DTR- 8500 (110V)

Model PMR-1 [Catalog No. 2121.04]
Phase & Motor Rotation Meter Model PMR-1

Model PR-1 [Catalog No. 2121.06]
Phase Rotation Meter Model PR-1

MICRO-OHMMETERS

Model 6250 [Catalog No. 2129.81]
10A Micro-Ohmmeter

Model 5600 [Catalog No. 1431.01]
10A Micro-Ohmmeter

MEGOHMMETERS

100V Megohmmeters
AEMC^® manufactures a complete line of low voltage insulation testers designed both field and shop use with communication equipment. They are ideal for measuring qualities of phone cables, data cables, and power cables. Measurement of AC and DC voltage, resistance and continuity, cable capacitance, cable length and AC current can also be performed.

500V Megohmmeters
AEMC^® manufactures a complete line of insulation testers designed to test the quality of insulation using 500V test voltage required for testing equipment designed to be powered by 240VAC. Both analog and digital meters are available. AC powered, battery powered and hand crank models are available. Most models will measure into the GΩ and TΩ range. Most models offer multi-function capability, measuring AC/DC volts, resistance and continuity as well as insulation resistance.

1000V Megohmmeters
AEMC^® manufactures a complete line of insulation testers designed to test the quality of insulation using 1000V test voltage required for testing equipment designed to be powered by 480VAC. Both analog and digital meters are available. AC powered, battery powered and hand crank models are available. Most models will measure into the GΩ and TΩ range. Most models offer multi-function capability, measuring AC/DC volts, resistance and continuity as well as insulation resistance. Both hand held instruments and rugged instruments built into portable cases are available.

5000V Megohmmeters
AEMC^® manufactures a complete line of insulation testers designed to test the quality of insulation using 5000V test voltages required for testing large motors, generators, transformers and cables. Both analog and digital meters are available. AC powered and battery powered models are available. Most models will measure into the GΩ and TΩ ranges. All models offer multi-function capability, measuring AC/DC volts, resistance and continuity as well as insulation resistance. Both hand held instruments and rugged instruments built into portable cases are available.

LEAKAGE CURRENT MEASUREMENT

Model 565 [Catalog No. 2117.56]
TRMS Leakage Current Meter Model 565 (TRMS, 60mA, 600mA, 100A, 600VAC/DC, Hz, Ohms, Continuity)

Model 2620 [Catalog No. 2125.52]
AC Leakage Current Probe Model 2620 (4A, 1V/A & 400A, 1mV/A output)

Model AN-1 [Catalog No. 1971.01]
Artificial Neutral Model AN-1

Model SR759 [Catalog No. 2116.33]
AC Current Probe Model SR759 (Lead - 1mvA/mA-1A;1mV/10mA-10A;1mV/100mA-100A;1mV/A-1000A max)

Model MN103 [Catalog No. 1031.02]
AC Current Probe Model MN103 (Lead - 1mV/mA - 10A max & 1mV/A - 100A max)

Model MN114 [Catalog No. 2110.71]
AC Current Probe Model MN114 (Lead - 100mV/A - 10A max)

Model 2610 [Catalog No. 1201.42]
Current Leakage/Insulation Probe Model 2610 (1mV/mA - 4A max & 1mV/A 200A max)

HIGHPOT TESTERS

Model H111 [Catalog No. 2129.60]
Hipot Tester Model H111 (5kVAC)

Model H216 [Catalog No. 2129.63]
Hipot Tester Model H216 (5kVAC/6kVDC and IR)

Model H110 [Catalog No. 2117.81]
Hipot Tester Model H110 (5kVAC)

Model H115 [Catalog No. 2117.82]
Hipot Tester Model H115 (5kVAC and IR)

Model H210 [Catalog No. 2117.83]
Hipot Tester Model H210 (5kVAC/6kVDC)

Model H215 [Catalog No. 2117.84]
Hipot Tester Model H215 (5kVAC/6kVDC and IR)

GROUND RESISTANCE TESTERS

Clamp-On Ground Resistance Testers
The Clamp-On Ground Resistance Testers measure ground rod and grid resistance without the use of auxiliary ground rods. Offer accurate readings from 0.01 to 1200Ω as well as ground leakage current from 1mA to 30Arms without disconnecting the rod under test.

3-Point Ground Resistance Testers
The AEMC^® 3-Point Ground Resistance Testers are available in both analog and digital models. These Fall-of-Potential testers are designed to reject high levels of noise and interference. Measurement ranges up to 1999Ω. Also available as a complete kit which includes leads, ground rods and carrying case.

4-Point Ground Resistance Testers
The AEMC^® 4-Point Ground Resistance Testers are ideal for both soil resistitivity and Fall-of-Potential testing. Models are available as battery powered or AC power cord. All models are available in complete kit form which includes leads, ground rods and carrying bag.

Multi-Function Ground Resistance Testers
The AEMC^® Multi-Function Ground Resistance Tester performs grounding resistance, earth coupling measurement, soil resistivity and bonding tests. This direct reading tester measures from 0.01 to 99,000Ω, and is auto-ranging, automatically seeking out the optimum measurement range test current and test frequency.

ENVIRONMENTAL TESTERS

Lightmeters
AEMC^® offers a variety of lightmeters to choose from. Our optical sensors are designed to match the response of the human eye making them ideal for workspace analysis and planning. The ergonomically designed cases, large display and intuitive function selection make these instruments the right choice for any application.

Infrared Thermometers
AEMC^® offers a variety of non-contact infrared temperature measuring instruments to meet needs. Models with and without laser targets are available. Measurement in °F and °C are easily performed. The ergonomically designed case, large display and intuitive function selection make these instruments the right choice for any non-contact temperature application.

Digital Thermometers
AEMC^® offers a variety of thermocouple and RTD temperature measuring instruments to meet needs. A complete line of temperature probes is also available to meet any application. Single and dual input models are available. Humidity can also be measured. The ergonomically designed case, large display and intuitive function selection make these instruments the right choice for any temperature application.

Sound Level Meters
AEMC^® offers a sound level meter which accesses sound ambiences and nuisances in accordance with international safety standards. The ergonomically designed case, large display and intuitive function selection make this instrument the right choice for sound measurement application.

Moisture Meters
AEMC^® offers a moisture meter which is designed to measure the level of moisture in wood and other construction meterials. The ergonomically designed case and easy-to-read LED display makes this instrument the ideal choice for your moisture measurement applications.

Carbon Monoxide Meters
AEMC^® offers a carbon monoxide meter which measures the level of carbon monoxide present in the surrounding atmosphere. The ergonomically designed case, large display and intuitive function selection make this instrument the right choice for carbon monoxide measurement applications.

ELECTRICAL TEST TOOLS

Circuit Breaker Identifiers
The Model CBI-1 makes it extremely easy and fast to find the circuit breaker or fuse that supplies a specific power receptacle or switch.

Phase / Motor Rotation Testers
The AEMC^® Phase & Motor Rotation Tester provides three functions in one unit: open phase indication, 3-phase sequence indication and motor rotation indication. Input voltage range is 100V to 600VAC. Frequency range is 45 to 70Hz. The unit is battery operated (9V) and meets EN 61010 safety requirements.

AC Line Splitters
The AC Line Splitter Model ALS-1 increases the sensitivity of clamp-on current probes and clamp-on meters. Avoiding splitting lines makes reading current easy. Simply plug the ALS-1 into a connector for a safe measurement. Direct readings are available.

Voltage Testers
The Voltage Tester is an ideal tool for checking wiring connections as well as grounding. It performs AC voltage tests up to 600VAC and DC voltage tests to 250VDC. The battery provides up to 5 hours of continuous operation.

Outlet Testers
The Outlet Tester detects faulty wire in 3-wire receptacles. It detects open ground and neutrals as well as reversed hot/ground connections. Ideal for use on 100 to 125VAC receptacles.

Outlet / GFCI Testers
The Outlet/GFCI tester examines GFCI for proper operation. It detects faulty wiring in 120V 3-wire receptacles. It detects open grounds and neutrals as well as reversed hot-ground connections. Ideal for use on 100 to 125VAC receptacles.

DC POWER SUPPLIES

Model AX501 [Catalog No. 2130.05]
Power Supply Model AX501 (Single output, 0 to 2.5A; 0 to 30VDC)

Model AX502 [Catalog No. 2130.06]
Power Supply Model AX502 (Dual output, 0 to 2.5A; 0 to 30VDC)

Model AX503 [Catalog No. 2130.07]
Power Supply Model AX503 (Triple output, two 0 to 2.5A; 0 to 30VDC; 2.7 to 5.5VDC)

DATA LOGGERS

Single Channel Data Loggers
Simple Logger^® is a single-channel, low cost data logger that requires minimal user setup. It has the ability to automatically adjust both its scale range and sample rate to optimize the recording session. Complete line of loggers offering full recording functions: thermocouple, thermistor, 4 to 20mA, DC voltage, AC current, and AC voltage. Windows-based software that can plot, analyze recording data and print graphs and data listings is included.

Multi-Channel Loggers
The Sentinel^® Data Loggers are battery powered three- and four-channel voltage and current recording devices designed to perform a variety of recording tasks with easy and intuitive setup from a computer, using AEMC’s DataView^® software, which is included. All Sentinel Loggers feature True RMS measurements.

CURRENT PROBES

Flexible Current Probes
Flexible current probes are designed to take measurements where standard clamp-ons cannot: in tight breaker panels, around large buss bars, around cable bundles, and even wrapped around irregular shapes. The flexible sensor has an output for direct readings on DMMs, Loggers, Oscilloscopes, and Power Quality Instruments. For enhanced safety, we designed a Shape Memory feature to pre-shape the sensor which eliminates the need to reach around a live conductor.

Oscilloscopes & BNC Terminated Probes
Oscilloscope current probes expand oscilliscope applications in industrial or power measurement environments, and are ideal for analysis and measurement of distorted current waveforms and harmonics. These current probes permit accurate display and measurement of current without breaking into the circuit under test. Connections are made directly to your oscilloscope through an insulated coaxial cable with an insulated BNC for enhanced user safety.

DC/AC MicroProbes
The K Series MicroProbes have an exceptional DC/AC current measurement capability. Very small and compact, these microprobes are designed for accurate measurements of very low currents with 50µADC sensitivity. The K Series probes are excellent companions to all DMMs and instruments that will benefit from the probe's high sensitivity, dynamic range and waveform displaying characteristics.

General Purpose Probes
AEMC^® manufactures the most complete line of current probes in the world. Whether you need to measure from a few µA to several thousand Amps, we have the probe you need. Our probes are designed to work in tight places and to clamp around large bus bars. We offer a variety of output options and terminations for recorders, data loggers, oscilloscopes, DMMs and other instruments.

CLAMP-ON METERS

Model 500 [Catalog No. 2117.54]
Clamp-On Meter Model 500 (AC, 400AAC, 600VAC, Ohms, Continuity)

Model 501 [Catalog No. 2117.21]
Clamp-On Meter Model 501 (AC, 400AAC, 600VAC/DC, Ohms, Continuity)

Model 502 [Catalog No. 2117.66]
Clamp-On Meter Model 502 (TRMS, 400AAC, 600VAC/DC, Ohms, Continuity)

Model 503 [Catalog No. 2117.22]
Clamp-On Meter Model 503 (AC/DC, 400AAC/DC, 600VAC/DC, Ohms, Continutiy)

Model 511 [Catalog No. 2117.67]
Clamp-On Meter Model 511 (AC, 1000AAC, 1000VAC/DC, Ohms, Continuity)

Model 512 [Catalog No. 2117.68]
Clamp-On Meter Model 512 (TRMS, 1000AAC, 600VAC/DC, Ohms, Continuity)

Model 514 [Catalog No. 2117.70]
Clamp-On Meter Model 514 (AC/DC, TRMS, 1000AAC/DC, 600VAC/DC, Ohms, Continuity)

Model F1N [Catalog No. 1207.01]
Clamp-On Meter Model F1N (AC, TRMS, 400A, Hz)

Model F3N [Catalog No. 1207.03]
Clamp-On Meter Model F3N (AC, TRMS, 400A, Hz, Peak, Smooth, Min/Max)

Model F01 [Catalog No. 2129.51]
Clamp-On Meter Model F01 (TRMS, 400AAC, Ohms, Continuity)

Model F03 [Catalog No. 2129.52]
Clamp-On Meter Model F03 (TRMS, 400AAC/DC, 600VAC/DC, Ohms, Continuity, Temperature)

Model F05 [Catalog No. 2129.53]
Clamp-On Meter Model F05 (TRMS, 400AAC/DC, 600VAC/DC, Hz, Power (kW), Phase Rotation, Ohms, Continuity)

Model F07 [Catalog No. 2129.54]
Clamp-On Meter Model F07 (TRMS, 400AAC/DC, 600VAC/DC, Hz, Ohms, Continuity, Temperature)

Model F25 [Catalog No. 2111.39]
Clamp-On Harmonic Meter Model F25 (TRMS, 600VAC/DC & 1500AAC/DC)

Model 721 [Catalog No. 1208.52]
Clamp-On Harmonic Meter Model 721 (9999-count, TRMS, V, A, F, Hz, THD, CF)

Model 701 [Catalog No. 1207.51]
Clamp-On Meter Model 701 (4000-count, Average Sensing)

Model 703 [Catalog No. 1207.53]
TRMS Clamp-On Meter Model 703 (4000-count, TRMS)

CALIBRATION / REFERENCE INSTRUMENTS

Decade Boxes
The AEMC^® Decade Box line covers a full range of applications including field, laboratory, R&D, maintenance and educational. The boxes are used to simulate capacitance and resistance.

Infrared Tachometers
AEMC® manufactures a unique line of hand-held non-contacting tachometers for measuring rotational speed. These microprocessor-based units incorporate photo electric reflecting circuitry to accurately measure rotational speed in RPMs. The instruments are not sensitive to the level of lighting in the area and can measure accurately from up to 20" away.

CABLE TESTERS

Model CA7024 [Catalog No. 2127.80]
Fault Mapper^® Model CA7024 (Cable Fault/Length Tester, Alphanumeric TDR)

Model CA7026 [Catalog No. 2127.81]
Fault Mapper Pro^® Model CA7026 (Telephone Cable Tester/Graphical TDR)

Model CA7028 [Catalog No. 2127.82]
Wire Mapper Pro^® Model CA7028 (LAN Cable Tester)

Model TR02 [Catalog No. 2127.75]
Tone Receiver/Cable Tracer Model TR02

ACCESSORIES