Please select the PDF
icon for
additional information.
Pull Testers
manual level testers
Model
Type
Capacity
PT-DPS
Pull Tester
Horizontal test stand
DPS Digital Force gauge (choice
of range)
WG-200 Cam Grip
WG-1 Grip
Max Load: 220 lbs
Outstanding accuracy of ±0.2%
Real time and peak mode
(selectable)
Newton, lb and Kg units are
selectable
RS-232C, Digimatic and analog
outputs
220 lbs
LV-DPS
Vertical Pull Tester
LV-220 vertical test stand
DPS Digital Force gauge (choice
of range)
GT-30 Vise Chuck or WG-300 Cam
Grip (your choice)
WG-1 or WG-2 Grip (your choice)
Max Load: 220 lbs
Outstanding accuracy of ±0.2%
Real time and peak mode
(selectable)
Newton, lb and kg units are
selectable
RS-232C, Digimatic and analog
outputs
220 lbs
LH-DPS
Horizontal Pull Tester
Horizontal test stand
DPS Digital Force Gauge
(specify range)
Crimp Test Attachments:
Stand side: specify GT-30 Vise Chuck or
WG-300 Cam Grip
Gauge side: specify WG-1, WG-2 or
KC-100 Grip
Max Load: 220 lbs
Outstanding accuracy of ±0.2%
Real time and peak mode
(selectable)
Newton, lb and kg units are
selectable
RS-232C, Digimatic and analog
outputs
220 lbs
FIBRE TEST
SYSTEM
Model
Type
Capacity
MH-220AC-S-TL
Optical Fibre Tester
The IMADA Fiber Pull Tester is
specially designed to perform pull tests on delicate optical
fibers in the manufacturing environment that requires
ruggedness and simple operation.
The unit has four preset force values (High Reject, High,
Low and Low Reject), to the 2nd decimal value, set by four
thumb wheel switches.
The pull tester will test the fiber within the allowable
preset force range between High and Low (i.e. between 1.05
kgf and 0.95 kgf) and maintain the force value for the
preset duration (i.e. 5 sec) for the preset number of
repetitions (i.e. 3 times) and stop, ready for the next
test.
Designed to shut off automatically in case of excessive or
inadequate pull.
