The MC-1200 provides a feature set unmatched in high accuracy, hand-held calibrators in its price range. The MC-1200 Calibrator provide the functions and accuracy assocaited with fixed-installation, laboratory instrument, and has everything needed for virtually any calibration task. Measure and source thermocouples, RTDs, current, voltage, and frequency, and source pulse trains. A communications port compatible with both Fluke® 700 Series and Beta Calibrators pressure modules is provided, as is an isolated mA/V read-back circuit. Arrow keys, direct numeric keypad entry, and three software driven function buttons, plus a large backlit, menu-driven graphics display combine to provide a highly intuitive, simple yet powerful operator interface. Built-in 250 Ohm resistor for HART(tm) compatibility, compatibility with smart transmitters and PLCs, full fuseless protection, are just some of the additional features that make the MC-1200 the single most indispensible tool available for virtually any calibration task. The MC-1200 is supplied in a tough, rubber boot; a carrying case is also available as an option.

General Features

• Measure and source T/Cs (13 types), RTDs (13 types), Ohms, current, voltage, frequency; source pulse trains
• Isolated mA/V read-back circuit for complete transmitter calibration
• Communication port compatibile with both Fluke 700 Series and Beta Calibrator pressure modules
• Built-in 24V supply can drive 4-20 mA lops up to 1000 Ohms
• Direct entry of custom RTD coefficients (Ro, A, B, C)
• All source modes can be programmed with dedicated setpoints to speed calibration and linearity tests
• Highest accuracy in class to 0.015% of reading
• Meets CE requirements and is designed to IEC 1010 safety standards
• Supplied in full rubber boot; optional carrying case available
• Pressure ranges: See Pressure Module Page
• Flash Demo
• Download MC-1200 Datasheet

The MC-1000 provides the combination of a high accuracy calibrator and common DMM functions. This single instrument will calibrate virtually any process device - read and source thermocouples, RTDs, Ohms, Voltage, current, frequency, pressure - and test continuity as well. The MC-1000 is compatible with 29 Fluke® 700 Series and Beta Calibrator pressure modules with the addition of a simple connector / adapter. The MC-1000 features a simple user interface, large display, and an RS232 interface.

General Features

• ±0.4°C thermocouple/±0.3°C RTD accuracy
• ±0.015% of reading electrical accuracy
• Ten (10) T/C types and eight (8) RTD types, plus YSI 400
• Read and source modes
• Full Function 4 to 20 mA read, source, simulate and read/power modes with ±0.015% of reading accuracy
• Source or read 0 to 20 volts (±0.015% of reading accuracy)
• Measure 0 to 250 VDC or VAC
• Direct keyboard entry enables quick output changes
• Store up to nine (9) setpoints for each output function
• RTD function compatible with all pulsed transmitters
• RS232 interface
• Supplied in full rubber boot; optional carrying case available
• Pressure ranges: See pressure module page
• Flash Demo
• Download MC-1000 Datasheet
• Download Product Comparison

First and foremost, the MasterCal 990 is a precision, multi-function documenting calibrator that will calibrate virtually any process instrument you have — thermocouples, RTDs, Ohms, Voltage, current, pressure, and frequency. A host of convenience features, including source ramp functions, loop power, variable density data logging with a week's worth of calibration results storage, compatibility with many third-party calibration documentation software programs, and a built-in HART configuration/communicatior make the MasterCAL 990 an indispensible tool.

A large, white backlit LCD provides simultaneous display of input and output. Menu-driven, "soft" function keys provide rapid setup and measurement. The multi-lingual interface ensure that the MasterCAL 990 is useful in as broad a range of applications and locations as possible. A high capacity rechargeable battery pack provides extended usage. An optional battery eliminator is available for extended monitoring applications. The MasterCAL 990 is housed in an over-molded urethane case that provides a solid grip and protection against "hard knocks".

General Features

• Precision multi-function calibrator and HART configurator/communicator in one hand-held instrument
• Measure/read thermocouple, RTD, Ohms, DC Voltage and current, pressure, and frequency
• Source/simulate thermocouple, RTD, Ohms, DC Voltage and current, pressure, and frequency
• Multi-lingual interface-English, French, German, Italian and Spanish
• Calibration automation and documentation with many popular third-party software packages. (See ProCalV5)
• Download MasterCAL 990 Datasheet