Panel Meters QUICK MOUNT This range of LCD meters includes a 1Vd.c. analog style voltmeter elapsed hour meter, thermometer (+14 to +122¼F), ±200mVd.c. voltmeter and 4V to 23V 2-wire voltmeter. Each module is 1.71" (w) x 0.34" (h). The round hole mounting method (meeting IP65) makes these meters very easy to fit. SP SERIES   This range of voltmeters has LCD and LED options. 12 pin dual-in-line connection versions are compatible with competing meters. Two lower cost versions (LCD, 9-pin and LED 8-pin) are more suited to new designs. The whole range included full-scale reading ±200mVd.c. with a typical accuracy of 0.1% (±1 count). Each module is 1.38" (w) x 0.88" (h). 10 SERIES   This range includes four voltmeters, each with a full-scale reading of ±200mVd.c., and a loop powered 4-20mA meter. The LCD voltmeter series uses a 5V or 9Vd.c. supply @ 350µA (typ.) while the LED voltmeter uses a 5Vd.c. supply #50mA (typ.) Each voltmeter has a single-in-line connection. The DPM 342 has screw terminals. V SERIES   A range of low cost, 3-digit panel instruments. An evaluation kit, containing one of each module and an evaluation board is also available. The meters have a ±200mVd.c. full-scale reading with a typical accuracy of 0.25% (±2 count). These meters use a 9Vd.c. supply @ 1mA. Designed for high volume OEM applications where lowest possible cost is a major concern. 35/65 SERIES   This range of meters is the low cost solution for a wide range of OEM's and Panel Builders. The DPM35 is available with either red or green LED's and the DPM65 has a reflective LCD display. The DPM65 comes with a snap in bezel while the DPM35 has an optional mounting bezel (BEX35).   700 SERIES The 700 Series has a one-piece carrier & window protecting the display. A separate plastic mounting bezel completes installation. 900 SERIES   A range of voltmeters and thermometers supplied with a separate mounting bezel, including window. IP67 Bezel available as option (BEZ-900-IP) OEM SERIES Designed as component style meters, the OEM Series are ideally suited to both medium and high volume applications. Typical uses for this series include personal instrumentation, integral sensor indicators and power supply monitoring. The range consists of two LCD meters, a bare PCB style meter & metal framed version and a potted LED meter. LEGACY SERIES   This range of LCD meters comprises some of our most popular older designs with 10s of thousands still in operation all over the world. Because of their older designs they are somewhat more expensive than our newer meters utilizing the latest component technology and manufacturing systems.   EM SERIES The EM32-1B-LED is a 3-1/2 digit voltmeter designed to be panel mounted in most low and medium volume applications. The meter features 8mm digit height, 3 decimal points, auto-polarity, auto-zero, 200mV full scale reading and a low current consumption. This product is designed so no soldering is required. Connection is via screw terminals, and options are selected via jumper links. The module features a round metal bezel, requiring a 32.5mm (1.28") diameter cut-out. It is secured with the nut provided. Protection from the front to IP67/NEMA4X standards is achieved by placing the rubber seal between the module and panel during assembly. POWER SUPPLIES   Linear Power Supply Loop Power Supply Miniature Power Pack for 4 to 20mA Process Loop Applications CALIBRATORS Digital Test Gauges Documenting Calibrators Loop Calibrators Multi-Function Calibrators Pressure Calibrators Pressure Pumps Temperature Calibrators Voltage / Current Calibrators

Simpson Electric, Simpson Panel Meters, Railroad Test Set, Panel Meters, Shunts, CTs, PTs, Encoders, Test Instruments, VOM, Leakage Current Tester, Line Loop Tester, Railroad tester, Sound level meter, Simpson 260 Analog VOM