|
Hand Pumps
|
|
PRESSURE
PUMPS
|
 |
|
|
 |
 |
MECP100
The Martel MECP100 Hand Pump is designed to be a simple to
use pressure and vacuum source for calibrating process
control instrumentation. Combined with one of our pressure
calibrators, the MECP100 makes a complete Pressure/Vacuum
Calibration System for low pressure applications. This pump
provides a source of air pressure, 0-100 psig, or vacuum,
0-28" Hg.
MECP500
The Martel MECP500 Pneumatic Hand Pump is a compact,
lightweight, portable hand-operated pressure and vacuum
pump. When a digital calibrator is added the unit can be
used to calibrate or check pressure measuring devices in the
field. No external power or high pressure bottles are
required. The MECP500 is completely assembled and ready to
connect to the pressure device to be calibrated. Calibration
is quick and simple since the pump is taken directly to the
pressure device. This pneumatic pump provides a source of
air pressure, 0-600 psig, or vacuum, 0-28" Hg.
MECP10K Hydraulic Pump
High Pressure Calibration Hand Pump provides a hydraulic
pressure source from 0 - 10,000 psi. A wide variety of
pressure media may be used, but distilled water is the
preferred fluid.
- Hydraulic Pump Features
- Ease of use
- Fine adjust vernier
- Fine release bleed valve
- High Pressure 0 to 10,000 psi
- Kits available
|
|
|
|
|
|
|
|
