|
A10 Series Rubidium Frequency
Standards: Oscillators & Instruments
|
a1000 - 1U rackmount low-cost Rubidium reference
|
 |
|
|
|
|
|
|
A10-X 10MHz
Rubidium Oscillator
|
|
|
|
|
A10-X6 10MHz Rubidium
Oscillator with 6 outputs
A10-XLB Portable 10MHz
Rubidium Frequency Reference
A10-FRS
|
|
|
|
|
 |
-
400cc
-
Size
51mm×76mm×102mm
-
Mixed 'D'
connector with RF coaxial connector through middle
(ask for details)
-
Available in
low cost (specify Opt. P400-01), standard (specify
Opt. P400-02) and high performance (specify Opt.
P400-03)
-
Also
available in 325cc size to special order
-
STS of
standard P400 is 3×10-11/t½
-
Freq. Offset
upon shipment <5×10-11
-
Drift of
standard P400 is 4×10-11 per month
-
24V DC power
required (15V upon request)
-
SSB phase
noise of standard is -148dBc/Hz @ 10 kHz offset
|
 |
|
lpro
|
|
|
|
|
|
-
450cc low
profile unit
-
38mm×94mm×127mm
-
Standard 'D'
connector for power with RF signal output through
adjacent SMA female
-
Available in
low cost (specify Opt. P450-01), standard (specify
Opt. P450-02) and high performance (specify Opt.
P450-03)
-
Also
available in 375cc size to special order
-
STS of
standard P450 is 3×10-11/t½
-
Freq. Offset
upon shipment <5×10-11
-
Drift of
standard P450 is 4×10-11 per month
-
24V DC power
required (15V upon request)
-
SB phase
noise of standard is -148dBc/Hz @ 10 kHz offset
|
|
|
HSRO
|
|
|
|
|
|
See A10-Y, (LPRO + A6-PPS) for current system use.
-
1000cc high
performance rubidium oscillator
75mm×87mm×157mm
-
6 pin
connector for 24V DC power (supplied) with adjacent
SMA like female connector (supplied)
-
STS of P1000
is 5×10-12/t½
-
Freq. Offset
upon shipment <2×10-11
-
Drift of
standard P450 is 2×10-11 per month
-
SSB phase
noise -155 dBc @10 kHz
|
|
|
|
|
|
|
A10-B
|
|
|
|
|
|
-
Bench top
instrument 220mm×220mm×57mm
-
Available
with any P400 or P450 Rubidium oscillator inside
(but not HSRO). Specify using codes above 1, 5 & 10
MHz sine and square wave via front panel (power
level ~10 dBm - adjustable)
-
1pps output
and 1pps input for synchronisation to external 1pps
(not GPS disciplining)
-
6× any of 1,
5 or 10 MHz sinewave via back panel (user
configurable)
-
Power
supplied by Ext. 24 V DC PSU (PSU has 110-240 V AC
input range)
-
Optional BBU
board (specify Opt. 10-01)
-
Optional
Telecoms version of A10-B with E1 and T1 outputs
(specify Opt. 10-02)
-
Optional
13MHz outputs (specify Opt. 10-03)
-
Optional BBU
board (Opt. 10-4)
|
|
|
A10-R
|
|
|
|
|
|
See A1000 for new systems application.
-
19" 2U rack mount instrument
-
Available with any A10-FRS, LPRO
& HSRO Rb Oscillator specify using codes above
-
1 core unbuffered 10 MHz output
via back panel
-
GPS disciplining interface as
standard (with VCO)
-
Optional 19" 1U Telecoms unit
with E1 and T1 outputs (specify Opt. 10-05)
-
Optional BBU board (specify Opt.
10-01)
-
Optional 13MHz outputs (specify
Opt. 10-03)
-
Optional BBU board (Opt. 10-4)
|
|
|
|
|
A10-M
|
|
|
E10 Miniature
Rubidium Oscillators
|
|
|
|
|
|
Applications
Benefits
Features
|
|
|
|
|
|
|
|
|
|
