|
Temperature
Calibrators
|
|
PTC-8001
PRECISION TEMPERATURE/RTD CALIBRATOR
|
 |
|
 |
 |
The Martel PTC-8001 Precision
Temperature Calibrator is an ideal device to handle all of
your temperature calibration needs in a truly rugged,
low-cost package. It combines virtually all widely used
thermocouples and RTDs in one device - you'll never have to
worry about finding a temperature device you can't
calibrate. This is especially true when calibrating "smart"
or pulsed RTD transmitters, where many other calibrators
fail to work or operate at reduced accuracy specs. The
PTC-8001 handles those applications with ease.
General
Features
- Calibrate thermocouples and RTDs
with one unit
- Works with Rosemount 3144 and all
other smart transmitters
- Direct keyboard entry or scroll
control of output
- User-defined setpoints
- High accuracy ±0.4°C J T/C and
±0.3 °C PT 100-385 RTDs; all errors included
- Ten (10) T/C types and eight (8)
RTD types including PT 385 (1,000 Ohm) and Cu (10 Ohm)
- NEMA 4 rated case, rugged design
- RTD simulation works with all
pulsed (smart) transmitters
- YSI 400 series thermistor range
for medical applications
- Standard mini-plug connections for
T/C
- Standard banana jack connections
for RTDs
- Store up to nine (9) setpoints for
each output function
- RS232 interface
- Supplied in full rubber boot;
optional carrying case available
- Download PTC-8001 Datasheet
- Download Product Comparison
|
|
|
|
|
|
|
TC-100
PRECISION THERMOCOUPLE CALIBRATOR
|
|
|
 |
|
The Martel Electronics TC-100
Thermocouple Calibrator provide high accuracy and
measurement of ten common thermocouples, as well as mV. The
TC-100's accuracy of ±0.3 °C for Type J T/Cs includes all
errors, at resolutions of 0.01 °C or °F in measure mode, and
0.1 °C or °F in source mode. Features including MIN/MAX
recall in measure mode, three setpoints per thermocouple
range, a large knob for decade control of the output in
source mode, and the ability to accept bare T/C wires in
addition to mini-plug inputs, makes the TC-100 an accurate,
easy-to-use instrument for all your thermocouple calibration
needs.
General Features
- High accuracy ±0.3 °C (Type J T/C
- all errors combined)
- Ten(10) common T/C Types plus mV
- Accespts both T/C mini-plug and
bare T/C wires
- Simple decade control of output
- Three setpoints for each T/C type
- MIN/MAX recall in measure mode
- Input protection to 240VAC
- Supplied in full rubber boot;
optional carrying case available
- Flash Demo
- Download TC-100 Datasheet
|
|
|
|
|
|
|
